Results 1 to 15 of 15

Thread: Can you remove rust spots on a blued finish with wire wool without removing the blue?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,532
    Quote Originally Posted by DT Fletcher View Post
    I've always had great results with Flitz polish. It doesn't affect the blueing but takes cares of the rust. Leaves protective finish is a plus.
    I used this on my COLT blackpowder pistol once took the case hardening right off, and on the bluing my rag was blue in color?

  2. #2
    Join Date
    Jan 2012
    Location
    Knoxville Tennessee USA
    Posts
    392
    Quote Originally Posted by 45flint View Post
    I used this on my COLT blackpowder pistol once took the case hardening right off, and on the bluing my rag was blue in color?
    ALWAYS test Flitz on a non-visible surface before diving in full-bore.

    For most modern chemical blueing it is harmless, but it will instantly dissolve old-time rust blueing. If you aren’t sure what you’ve got, be careful with it.

  3. #3
    Join Date
    Jan 2003
    Location
    Ringwood
    Posts
    4,953
    I think the stuff Flint45 pictured is sometimes known as Frontier Big 45 (only available in the US)...I've used the stuff and it's brilliant, looks aggressive but if used with oil I've found leaves the blue unmarked.
    Remember, it is the strongest character that God gives the most challenges.

  4. #4
    Join Date
    Apr 2006
    Location
    West Fife
    Posts
    445
    I've used the copper coin trick for donkeys years too, not sure where I heard it from either.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •