Registered User
Hi up all . anybody got strip details for a GC2 ? i have a MK 11 which as in all these early one is very hard to cock for the first ten or twenty shots . i have a defunct MK11 action with a MK111 bleed valve . so i need to strip both , to save my thumb from ruin ??? HOLLY
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
Registered User
You know it can't be done with a lump hammer and a bolster chisel don't you?
Well it can, but getting it back together again afterwards is the hard bit, you usually need a bigger hammer.
"Instruments of the light"
Don't even think about it!
Dave Welham of Air Masters 88 did one and will not attempt another. The break down isn,t that hard but the fiddling to put it together and function correctly is.
Dave Brayfield at Staffordshire custom rifles did my servicing and at a good price(he loves them).
Sports Match are good but expensive,however if you insist on fiddling with one and going inside I have a drawing I made of the section internals if you really want the aggro.
The main problem is the balance of the bleed valve? and second cup spring resistance. Either too much or less movement will close the supply of air or leave chamber open to main reservoir. Less power or more!.There is a gauge to measure this I believe?
PM me Holly if you want a copy of drawing, call Dave Welham or Dave Brayfield who I am sure will educate you to the niceties of John Fords design.
HERX77
And mine shoots really good save you asking .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Registered User
Howdo Herx . i did try to PM you but your inbox is full up with the goverment demanding money ? . i don't know of course but i thought they came out in a lump so to speak . i don't want to go into the internals . just swap the bits . > cheers HOLLYOriginally Posted by Herx77
Don't even think about it!
Dave Welham of Air Masters 88 did one and will not attempt another. The break down isn,t that hard but the fiddling to put it together and function correctly is.
Dave Brayfield at Staffordshire custom rifles did my servicing and at a good price(he loves them).
Sports Match are good but expensive,however if you insist on fiddling with one and going inside I have a drawing I made of the section internals if you really want the aggro.
The main problem is the balance of the bleed valve? and second cup spring resistance. Either too much or less movement will close the supply of air or leave chamber open to main reservoir. Less power or more!
PM me Holly if you want a copy of drawing, call Dave Welham or Dave Brayfield who I am sure will educate you to the niceties of John Fords design.
HERX77
And mine shoots really good save you asking .
PS Uncle Neil , please take a long walk off a short pier .
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
Administrator
I thought Gerald Cardew designed the GC2 ?
Registered User
Sportsmatch no longer service gc2s they recommend Staffs Custom Rifles.
Registered User
Yes i know . but that is £150 or more . if it is just a part change inside . why waste a £150 ??? HOLLY
" BE YOURSELF , EVERYBODY ELSE IS TAKEN "
Registered User
Really? Since when? That's a shame...
Posting Permissions
Reply With Quote