Page 1 of 4 123 ... LastLast
Results 1 to 15 of 51

Thread: my short review of my impact airgun gsx200 .177

  1. #1
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821

    my short review of my impact airgun gsx200 .177

    ok I was going to do a full shot count over my f1 crony but as with the crappy low light conditions and pooring rain I just did a shot count in my workshop so here are my finding's
    gsx 200 .177
    fill pressure 200 bar
    15 x 17shot mag's =255 shot's
    100 bar left showing on the guage and on my dive cylinder when I charged it up
    so according to that it use's 0.3 bar per shot shooting jsb's 8.4 @11.7 f/lb
    so maybe if I had enough air in my dive cylinder to fill to 220 bar I should be getting about 320 shot's ,



    It's like shooting a well fettled rapid straight out of the box ,the stock shoulder's like a custom fitted stock ,it's well balanced and very pointable with the barrel being only 14 inche's long I was supprised just how quiet it is with wot look's like the old long series silencer fitted with a different baffle arrangement inside, the trigger unit is the same mk4 unit as fitted to the later rapid's but it's been worked on and you can tell this straight away ...very light and a crisp clean break ,the cocking and firing of the action tell's me that it's been improved over the old block's by that I mean a different firing valve ,modified hammer and better spring setup's all aid consistency and air usage ,this is further enhanced by the modified regulater all of which will save money in the long run as guy's wont have to do any mod's because there already fitted as standard, the quickfill is a very good addition as you don't have to take the bottle off ,accuracy wise I cant find fault with the lw barrel very good machineing work on the crown and also come's screwcut should you want to change the silencer for something else ,the magazine supplied work's flawless very smooth loading all backed by a 10 year warranty mean's this is a serious piece of kit well worth the money I think , later





    cheer's john
    Last edited by john79; 19-11-2014 at 09:48 PM.
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

  2. #2
    Hsing-ee's Avatar
    Hsing-ee is offline may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
    Join Date
    Dec 2001
    Location
    Glasgow
    Posts
    18,217
    Very pretty and a nice long warranty. How accurate is it?

    Why is it named after a Suzuki motorbike?

  3. #3
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821
    Quote Originally Posted by Hsing-ee View Post
    Very pretty and a nice long warranty. How accurate is it?

    Why is it named after a Suzuki motorbike?
    it's just as accurate as any other high end priced gun's
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

  4. #4
    Join Date
    Aug 2003
    Location
    chesterfield ,derbyshire
    Posts
    2,216
    looks a cracker there fella Good to here they are great straight from the box

  5. #5
    secretagentmole Guest
    Quote Originally Posted by john79 View Post
    it's just as accurate as any other high end priced gun's
    And just as accurate as several lower priced ones too!

  6. #6
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821
    Quote Originally Posted by secretagentmole View Post
    And just as accurate as several lower priced ones too!
    no you get wot you pay for moley, cant compare this to a lower end pcp it's in a different league
    Last edited by john79; 27-12-2013 at 04:07 PM.
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

  7. #7
    Join Date
    May 2013
    Location
    Sheffield
    Posts
    472
    No I agree a well sorted rapid shoots better than anything on the lower end of market.

    I must say the gun looks the absolute nuts mate to boot.

    Kind of thing you could own for decades without wanting to change.

  8. #8
    Join Date
    Jan 2010
    Location
    Formby
    Posts
    3,278
    The whole package looks great to me. Particularly if the customer service is up to what has been described in print recently.

    Andy
    Member, the Feinwerkbau Sport appreciation Society (over 50's chapter)
    http://www.rivington-riflemen.eu/ Andy, from the North !

  9. #9
    secretagentmole Guest
    Quote Originally Posted by john79 View Post
    no you get wot you pay for moley, cant compare this to a lower end pcp it's in a different league
    Like Bog it is! I have a Daystate, cost less, bet it will match it for accuracy! For instance, my X2 at 35 metres made the following group of 10 shots in the open air!


    Shot grouping by an X2 that cost £275 secondhand!

    A Regal costs under £800, bet it is just as accurate as the Impact! The Impact is overpriced for what it is, a warmed over Rapid with a lot of other peoples work incorporated into it!

  10. #10
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821
    Quote Originally Posted by secretagentmole View Post
    Like Bog it is! I have a Daystate, cost less, bet it will match it for accuracy! For instance, my X2 at 35 metres made the following group of 10 shots in the open air!


    Shot grouping by an X2 that cost £275 secondhand!

    A Regal costs under £800, bet it is just as accurate as the Impact! The Impact is overpriced for what it is, a warmed over Rapid with a lot of other peoples work incorporated into it!
    you bit there moley
    im impressed with that moley look's like you stabbed a hole in some cardboard with a biro
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

  11. #11
    Join Date
    Mar 2011
    Location
    wadebridge cornwall
    Posts
    1,989
    so is it basically a rapid ? someone presumably bought-out theobens tooling and started re-making the rapid under a different name ? just curious
    TINKERING WITH PASTY POWER

  12. #12
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821
    Quote Originally Posted by slugger View Post
    so is it basically a rapid ? someone presumably bought-out theobens tooling and started re-making the rapid under a different name ? just curious
    something along those line's

    john
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

  13. #13
    Join Date
    Jan 2012
    Location
    Stockton-on-Tees
    Posts
    976
    looks stunning John

  14. #14
    russian sniper is offline 1982 Sausage roll and cider gargling regional finalist
    Join Date
    Aug 2002
    Location
    Paisley - Scotland
    Posts
    6,309
    Is it a rip off rapid??

    It does look expensive - how much do they sell for???

    Daz
    (former rapid nut)

  15. #15
    Join Date
    Jun 2011
    Location
    kettering
    Posts
    821
    Quote Originally Posted by russian sniper View Post
    Is it a rip off rapid??

    It does look expensive - how much do they sell for???

    Daz
    (former rapid nut)
    £1195 worth every penny
    BSA SUPERSPORT V-mach .22
    RAW hm1000x 177
    Steyr challenge hft 177 SYWELL FT CLUB

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •