Results 1 to 8 of 8

Thread: Schofield wooden butt scales?

  1. #1
    Join Date
    Aug 2000
    Location
    Liskeard,Cornwall,UK
    Posts
    4,199

    Schofield wooden butt scales?

    Does anyone know of anyone making/selling wooden replacements for the plastic butt scales of the Schofield, please?

  2. #2
    Join Date
    May 2015
    Location
    stratton
    Posts
    264
    im having some made at the moment by a friends brother, I will get back too you when they are done, will probably be in a 2-3 weeks time.

  3. #3
    Paul55 is offline I get by with a little help from my friends
    Join Date
    Sep 2009
    Location
    Peterborough
    Posts
    2,797
    Very interested in these, I'll be keeping my eyes open here for news.
    UBC Resident Cowboy
    St Paul of 55
    Been there, bought it, tried it, sold it

  4. #4
    Join Date
    Aug 2000
    Location
    Liskeard,Cornwall,UK
    Posts
    4,199
    Thanks, billywhizz, I'll look forward to that! The plastic ones don't look bad, but I'd just like wooden ones.

  5. #5
    Join Date
    Jan 2009
    Location
    christchurch
    Posts
    7,130
    I’m up for a set too.

  6. #6
    Join Date
    May 2015
    Location
    stratton
    Posts
    264
    the other thing you can do is very lightly sand down the plastic grips with some 1000 wet or dry paper,this takes off the shine and makes them look more like wood, ive done mine and they turned out ok. the other thing that ive done is too alter the hammer stroke so that the hammer sits closer too the pistol at rest ,it looks much better than having the hammer stuck out in mid air.

  7. #7
    Paul55 is offline I get by with a little help from my friends
    Join Date
    Sep 2009
    Location
    Peterborough
    Posts
    2,797
    How did you alter the hammer stroke?
    UBC Resident Cowboy
    St Paul of 55
    Been there, bought it, tried it, sold it

  8. #8
    Join Date
    May 2015
    Location
    stratton
    Posts
    264
    there is a vid on you tube which explains it, but I filed away some of the material on the trigger /hammer activator, is kinda hard too explain.there are only 4/5 small phillips screws that hold the left side of the body covering the hammer trigger units,if you take this off !!!watch out behind it is a tension spring which flies out but is ok to get bck in ,put a little grease on it help it stick onto place. so watch the vid is a good idea first. ive just tried too find a link too it but no joy yet sorry , but its deff on you tube , a german or Belgium guy .ok I found another vid on you tube called fixing my colt saa,by a guy called greygun 64
    Last edited by billywhizz1; 25-06-2018 at 09:03 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •