Originally Posted by
Aimstraight
Out of interest, which part gets bent, the bear metal one (with the brass screw in it) or the black coated lever that presses on that? I just noticed that black lever on the CP88 is less substantial than the 92fs.
The one with the brass screw in, it deforms and causes the brass screw to bind If you try to straighten it you'll more than likely snap it so just remove the brass screw and grind a bit of the casting away to allow the screw to come out fully. You can get get away with that a couple of times then you'll need a new pusher plate.
You want it fixed when??!
Reply With Quote