It's easier to machine with the bridge piece otherwise you would get an intermittent cut.
Also the sample I made is only 6mm thick and without a bridge piece to act as a tie I think there is a risk of the sides opening out.
Have you considered eliminating the thin strip strip between the holes and having connecting circles?
Steve C.
AirArms S400k L/H (.177)BTAS, tuned, AirArms S410k L/H (.177) walnut, BTAS tuned, AA MPR .177 L/H walnut (STOLEN) and...L/H EV2
BASC
It's easier to machine with the bridge piece otherwise you would get an intermittent cut.
Also the sample I made is only 6mm thick and without a bridge piece to act as a tie I think there is a risk of the sides opening out.
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
Pics as promised.
Cheers.
Roy.
If it moves.....shoot it!..If it don't move.....shoot it in case it tries to!!!
Light travels faster than sound....this is why I appear bright until you hear me speak!!!
Where did it need filing, Roy?
Like the crackle paint... :-)
www.shebbearshooters.co.uk. Ask for Rich and try the coffee
Bottom of the top hole, and top of the bottom hole!
It's not a perfect fit Rich, but with the measurements I gave you I'm not surprisedyou did outstandingly well to get it as close as you did!!
Bought myself an Aldi/Lidl digital measuring stick and the 19mm shroud is nearer to 19.2mm!
Ahh, well it's fitted and stops the floating barrel from floating!
Cheers.
Roy.
If it moves.....shoot it!..If it don't move.....shoot it in case it tries to!!!
Light travels faster than sound....this is why I appear bright until you hear me speak!!!