Results 1 to 6 of 6

Thread: Butt Pad wanted for HW77.

  1. #1
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,595

    Butt Pad wanted for HW77.

    Does anyone have a butt pad from an HW77 they would like to part with?

    I am restoring an HW77 stock but have no butt pad or gasket.

    I could fit a Bisley adjustable butt plate but I would prefer to keep it original if possible.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  2. #2
    Join Date
    Apr 2007
    Location
    Dudley
    Posts
    9,206

    Butt Pad.

    Send us the size you require. Got 3 but all different widths and length. Mach 1.5

  3. #3
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,595
    Quote Originally Posted by Mach 1.5 View Post
    Send us the size you require. Got 3 but all different widths and length. Mach 1.5
    Thanks Paul,

    The end of the stock is 126mm high and 42mm wide at its widest point, but I can make adjustments to the stock or the pad if they are close enough to each other.

    All measurements have been achieved with keen (but ancient) eyes so they can be regarded as accurate (and approximate!).

    Best regards,

    Bob.
    Last edited by zooma; 24-06-2018 at 11:24 AM.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  4. #4
    Join Date
    Apr 2007
    Location
    Dudley
    Posts
    9,206

    Butt Pad

    Got one. Send us your address again, sorry. I'll send free of charge. Regards Mach 1.5

  5. #5
    Join Date
    Mar 2010
    Location
    Rossendale and Formby
    Posts
    5,595
    Quote Originally Posted by Mach 1.5 View Post
    Got one. Send us your address again, sorry. I'll send free of charge. Regards Mach 1.5
    Brilliant - thanks Paul - address sent to you by PM.
    Rossendale Target Shooting Club. Every Tuesday and Thursday evening 7 - 10pm.

  6. #6
    Join Date
    Apr 2007
    Location
    Dudley
    Posts
    9,206

    Butt Pad

    Posted. Best wishes Mach 1.5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •