Who makes silencer adaptor said on here now

[Whitester]

As above , I know that elder fud used to make them but does anyone know if anyone makes then now please?

[Steve C.]

As above , I know that elder fud used to make them but does anyone know if anyone makes then now please?

Rowan Engineering.

[Whitester]

Unfortunately Rowan don’t do one for the wolverine barrel

[Rich]

What is so special about the Wolverine barrel?

[Whitester]

What is so special about the Wolverine barrel?

It's 12 m in diameter and rowens start at 14 mm

[robhw97k]

theres a lad called mattw975 on makes silencers ect he might be able help ya.

[Whitester]

theres a lad called mattw975 on makes silencers ect he might be able help ya.

Cheers mate i’ll Give him a try

[averageplinker]

Have you checked our sponsors website? JS Ramsbottom do loads at great prices.

[Rich]

It's 12 m in diameter and rowens start at 14 mm

Do you want it to fit the barrel then and not the shroud?

I thought there was a screwed plug in the end of the shroud with a cap on the end to protect the thread.

If I get this right you want a fitting with 12mm bore to go over the barrel, and presumably a couple of grub screws to lock it into position, then a 1/2 inch UNF male thread long enough for a silencer to screw onto.

[bighit]

Have you checked our sponsors website? JS Ramsbottom do loads at great prices.

This one http://www.jsramsbottom.com/products...r----12mm.html

[Whitester]

I've tried the 12 mm from js ramsbottom but it doesn't fit bizarly enough.

I've taken the shroud off because the pellets kept clipping it and ruining accuracy.

I've mailed rowen engineering now to see if they can help, failing that I will get it screw cut and re blued.

[Rich]

In what way does the JSR not fit?

I mean, I could make you one easily enough so long as the dimensions were there to work to.

[Whitester]

In what way does the JSR not fit?

I mean, I could make you one easily enough so long as the dimensions were there to work to.

It's slightly too small, just found out that the barrel diameter is actually 12.65 mm. Well at least I think it is because that's the diameter of the air wolf barrel.

Will pm you regarding making one, thanks for your help.

[averageplinker]

It's slightly too small, just found out that the barrel diameter is actually 12.65 mm. Well at least I think it is because that's the diameter of the air wolf barrel.

Will pm you regarding making one, thanks for your help.

I think you need to measure your barrel rather than rely on guess work if you are to get one custom made.

[Whitester]

Just like to say a big thank you to Rich who came to my rescue and knocked up an adapter in double quick time.

The only problem was me who measured it wrong🤨. For the record the Daystate wolverine barrel size is 12.95 mm.

Luckily my mate has a laithe and he opened up the bore, adaptor now on barrel👍