Results 1 to 5 of 5

Thread: Silencer Help

  1. #1
    Join Date
    Jul 2018
    Location
    London
    Posts
    1

    Silencer Help

    Hello!

    Iím looking for a very specific prop for a film, and thought you guys might have the brilliant knowledge to help me! This is an image of a PH MM1 Sound Mod.

    https://ibb.co/ijfZwo

    I think Iíve found the exact model here: http://www.williamshearer.co.uk/index.p ... rator-22rf).

    The only thing that doesn't match is the bit sticking out of the end is on the right-hand side of my first picture though. Any ideas? Is it an adaptor, or is there a different model, which has that extension? Most either have a tapered end, or it's just flat....

    Thanks so much!

  2. #2
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    22,418
    Some mods screw straight on to the end of the barrel, others slide over the end (reflex)for a few inches before they screw on, while yet others slide on & are then secured with a grub-screw perpendicular to the barrel.

    Different variants of the same mod can have minor differences like that or it could be an adaptor for a different thread pattern.

  3. #3
    Join Date
    Jul 2000
    Location
    Shebbear, N Devon
    Posts
    12,973
    Designs vary; the diagram shows something like this, except not so large in diameter:

    https://i.imgur.com/73Pqo4l.jpg
    www.shebbearshooters.co.uk. Ask for Rich and try the coffee

  4. #4
    Join Date
    Nov 2007
    Location
    Wiltshire, not far from Stonehenge
    Posts
    688
    I thought the PH in front of the designation referred to Parker Hale as in the very popular, but no longer seen, is just a tube that screws on to the end of the barrel, no protrusion or over barrel section.

  5. #5
    Join Date
    May 2008
    Location
    chesterfield
    Posts
    534

    prop ,

    that's an early alloy r/f parker hale if not mistaken.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •