Registered User
I am stuck so hoping someone can help this idioti have taken the butt off. Removed the top 3 screws. One by barrel and the top rail 2 screws. But the action cover is still not coming off. Am i doing something wrong or is there another screw i am missing i need to remove? Help please as am at wits end.
Killer Vampire Lesbians on scooters
Check the side of the reciever for a small hole with a pin drifted in which acts as a Heath Robinson AT device. Sometimes you can simply tap this pin in until the reciever comes off, other times it needs drilling out.
God rest ye jelly mental men
Registered User
now I know why that one I got off you had a small hole there - dohOriginally Posted by tinbum
Last edited by Shed tuner; 15-07-2018 at 06:35 PM.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Registered User
Bugger. Spotted it. Sneaker buggers putting that there. Job all done. Cheers nicky m8.
Registered User
Woes continue with the sumatra. Thought it was weird the gun had zero pressure when i pulled it out of the cabinate. After renewing hammer spring i filled her up. As sson as i udid bleed screw the gun emptied its guts again. Next job to replace the seals. Being pressure locked for so long looks like the seals have blown
Registered User
Where is it leaking from ? They are not really hard to work on, once you have have the extra long blad bladed screwdriver valve removal tool. But if it's only leaking from the cylinder ends, the valve can stay put...Woes continue with the sumatra. Thought it was weird the gun had zero pressure when i pulled it out of the cabinate. After renewing hammer spring i filled her up. As sson as i udid bleed screw the gun emptied its guts again. Next job to replace the seals
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Registered User
Dont know whats gone john. As soon as i turn the bleed screw on dive bottle its dumping all pressure from the gun out through the bleed.
Posting Permissions
Reply With Quote