Originally Posted by
Gareth W-B
Never tried on an AIRGUNAID, but am going to assume it is threaded and loctite (or similar) secured, rather than an interference fit, so applying a little heat and twisting anti-clockwise while staring at the barrel's business end should do the job, although I would leave your DG as a .177 to keep it's integrity if I were you?
I say that, as saw a boxed AIRGUNAID SP5 as a kit, once, with a separate .177 block and barrel assembly in the box alongside the .20 set up, so as Don and Eddie developed the DG .20 and the SP5 .20 in unison with Milbro, I assume the .177 set up that your example sports is Kosher and quite unique on reflection?