Also just realised the two tiny grub-screws by the red dot laser are to zero it, so it also gives you a laser target designator in daylight &/or at night with NV goggles.
Seems obvious now I've done it
Also just realised the two tiny grub-screws by the red dot laser are to zero it, so it also gives you a laser target designator in daylight &/or at night with NV goggles.
Seems obvious now I've done it
I've had one for 3 weeks and its a cracking little unit, one issue I thought I might have is when fitted to a scope with target turrets? I was semi convinced the IR illuminator would be interfered with by the tall elevation turret of the Optisan EVX FFP scope on my .22lr but it still works great. The scope still has a torch mount on it anyway as I usually run a ward 800 on that.
FFP scopes can be troublesome with NV add-ons as the reticle clarity changes if you make any magnification adjustments. but the WG760 has a much better focusing system when compared to the wardy 800 that its easy to get a clear reticle picture again, the ward can be a faff on to get crystal clear.
I'll be in the market for a couple of additional scope clamps now to make swapping the WG between my airguns, .22LR's and HMR very easy.
Not sure I'd use the laser dot but maybe it could be useful for some ratting when on the airgun? hey, its a freebee, might as well try eh?
great review by the way.
just took deliver of my addon from crs, but would like to know if spaceing shims are availeable,
Not from the maker they supply a roll of tape to build up the ocular, which works fine.
I use shims from my Cobra/Wardy, you can buy the Cobra set but they're not cheap.
Time to "think outside the box" & go a bit "Blue Peter" maybe a section from a sink waste pipe fitting, gutter pipe, or plastic pot of some kind ?
Measure the gap, half it & that's the thickness you need.
Theoben Rapid MK1 177
AA S410 22
Bushnall Scout Range Finder
Hawk 3 x 9 x 40 m.a.p scopes
Deben mini pro lamping system
Get a sheet of 2mm Neoprene off the bay, worked great as a shim on my 2 adaptors.