Wanted, Diana 34/52 cast metal trigger guard

[maximus]

As per the title, I don't suppose any of you have one of the above to sell me? It's for rifles fitted with the T01 trigger.

Thanks Max

[maximus]

Sorted now thanks

[Drew451]

Glad you got sorted. Very hard to source now. Last seen at Chambers probably 2 or 3 years ago. I tried a search on a couple of German outlets but couldn't really navigate their sites.

[maximus]

Must confess, I bought one of the modern plastic ones from chambers! At least it makes it usable. The gun is a 34, or is it 38? The one with the angular forend but no firebird medallion. It's currently in bits waiting top hat and guides which will come today. It was a little under powered but the spring is good and straight so a little more pre-load will sort the power. I was impressed with how it grouped with falcon accuracy plus though.

[rovercoupe]

As far a i can remember these wont take much pre load before coming coil bound so go steady.

[jonnyone]

Must confess, I bought one of the modern plastic ones from chambers! At least it makes it usable. The gun is a 34, or is it 38? The one with the angular forend but no firebird medallion. It's currently in bits waiting top hat and guides which will come today. It was a little under powered but the spring is good and straight so a little more pre-load will sort the power. I was impressed with how it grouped with falcon accuracy plus though.

I hope to undertake a similar course of work to my own 38 and it can only get better. After initially struggling with the 38 (I'm chopping and changing guns too much of late) I got it working right for me and as you say accuracy is very good. Its as dry as you like inside unfortunately and as such I don't want to use it too much before correctly lubing it.

Would be good to hear some feedback of how you get along post tweaking work?

Dave

[maximus]

Got it back together the other day and it is now lovely and quiet to shoot, no twang at all but it's only doing 9,5ft lbs. I suspect the breech o ring may not be sealing properly or the piston is a bit tight so further tinkering required. I will start with the breech seal.

Edit, swapped the breech seal and now doing 591 fps with falcon accuracy plus equating to approximately 10.5 ft lbs. Happy with that for now, will do some open sight plinking and see how it goes.

[Geezer]

The gun is a 34, or is it 38? The one with the angular forend but no firebird medallion.

Not 100% sure, but I think it’s either a 38 or a 34S. Though I have a feeling that stock design was also sometimes sold as a 36 (the usual 36 being a 34-style stock with chequering on the grip and better stock finish). I stand to be corrected, but I think the Firebird thing was dreamed up by the then U.K. importer.

Mid 80s to mid 90s Dianas are confusing. There are lots of minor variants.

[wil95k]

firebirds had a gold medalion under the pistol grip.hth