10m home range project.

[MrChipShoulder]

Time to work on the range has been hard to come by recently for a few reasons, but I've finally managed to get the target sled in the tunnel and working well. To move the sled, all you do is press the cord release button and pull on the cord. Once the sled is in place, just release the button and it locks the cord. There will be a pointer added to the sled and markings on the tunnel wall for sled position (6yd, 7yd, 10m). The only slight hassle to move the sled now is that somebody has to pull the slack on the lighting cable as the sled is being pulled back up the tunnel. The cable is simply left coiled in the back of the tunnel or laid on the floor at the shorter ranges.

All that's left to do tomorrow (hopefully) is to make the front and rear back board panels. The rear one will be 9mm MDF and the front one will be 3mm hard board covered in white Terry Towel.

https://ibb.co/7G01ZCJ
https://ibb.co/LYbdJx1
https://ibb.co/7Wrg3fx
https://ibb.co/bP4LZmD
https://ibb.co/YLyR5kY
https://ibb.co/3FHXRmL
https://ibb.co/WshJPkz
https://ibb.co/02Lrdxw
https://ibb.co/ZN6Tq9Y
https://ibb.co/YPZzm3L