Page 3 of 8 FirstFirst 12345 ... LastLast
Results 31 to 45 of 119

Thread: 10m home range project.

  1. #31
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    Quote Originally Posted by angrybear View Post
    You post images either by putting them on a host site like "imgbb" & copy/paste a link code, which I prefer to do to keep the actual post smaller.
    or host the picture direct in to your post using the "insert image" link in the middle row above the dialogue box 4th from right.
    Thank you Angrybear, I couldn't find the pics link in this BBS thread so I went for your image host option. I have got a Photobucket account, but it's 'off the chart' hopless and slow!!

    Here are some pics so far of stuff to show.

    https://ibb.co/kLEsH9
    https://ibb.co/kYMuVU
    https://ibb.co/fVB6c9
    https://ibb.co/bKdV4p

    The grey and alloy pulley parts are home made and home cast then turned. The pic shows one set running off the Vauxhall windscreen motor gearbox. The gearbox is very slow, but after playing with different size pulleys, I got the cord speed pretty good and quick The alloy boss was turned up and a 10.5 degree taper hole made so the output shaft taper splines can engage.

    The extra pulley bolted to the bottom of the proprietary Crapbay pulley was turned up from some nylon stock I had. There was a lip in the proprietary Crapbay pulley, so I used that as a register for locating my nylon extra pulley. The resin double pulley is yet to have a pair of double bearings added (they are on their way) I just drilled a 10mm hole for now so can test the speed. The picture also shows some swarf in the 'U', that is just some muck off the bench, the 'U' IS perfectly smooth

    Now I've got the speed right I was able to order the drive belts. They are 175mm diameter and 5.5mm round cross section. Hoping they will get here tomorrow so I can make the whizzer boxes and get all the 'guts' in one working place
    Last edited by MrChipShoulder; 13-09-2018 at 03:15 PM.

  2. #32
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    Quick update on the whizzers.

    Starting to stich all the bought and made parts together now

    https://ibb.co/ceYj6e

    Total cost of what you see here is £36! Basically just the motors, the rest is made from stock I already had.

  3. #33
    Join Date
    Nov 2005
    Location
    New Milton, Hampshire
    Posts
    14,389
    Looks nice.

    I wonder what 50m of that ducting would cost

  4. #34
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848

  5. #35
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848

  6. #36
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by Sunbeam View Post
    More whizzer updates.

    https://ibb.co/khD0xK

    Just need to make the covers now.

    Looking good, Rob.

    Do you think the motors would have enough torque to work a target out to 50 yards ?

    Something I'm hoping to built at Quigley Hollow when I'm back on my feet.




    All the best Mick

  7. #37
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    Hi Mick,

    Torque is not a problem, drive belt slip and gearing up are problems I've had.
    Gearing up is easy, but belt slippage is more of an issue.
    For now, I've solved it, but the belts are a little stretchy and they may slacken off over time?
    If you made the gears out of push bike sprockets from the front and back,you'd have it cracked !!
    Somthing I may end up doing, but for now, it's all working fine

    Replacing the pulleys for bike sprockets is very easy, just turn the pulleys down 3mm and bolt on the sprockets.
    You can buy whole new matching bike sprockets (cassettes) and chain from Crapbay for peanuts!

  8. #38
    Join Date
    Jul 2000
    Location
    Tremar
    Posts
    14,239
    Belt slippage, try using bigger pulleys.
    www.shebbearshooters.co.uk. Ask for Rich and try the coffee

  9. #39
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    And today the new plastic shed went in.
    Still got to bolt it to the ground, but thats no big deal.

    https://ibb.co/duUg9z
    https://ibb.co/kPdmbe

  10. #40
    Join Date
    Jan 2018
    Location
    St Helens
    Posts
    996
    Fingers crossed you don't get the wind we've had today , I'd be putting them holdin down bolts in just in case

  11. #41
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    And the cover boxes made and painted for the whizzers.
    Note also the guides infrount of the cable wheel.
    The guides are 7mm with a smooth 'funnel' just incase the cable gets a 'wobble on' at any point.

    https://ibb.co/jTXPwe

  12. #42
    Join Date
    Oct 2012
    Location
    pontypridd
    Posts
    527

    tunnel

    Brill idea wish you all the best with your project

  13. #43
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848

  14. #44
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848
    And some more progress today between working!
    Needs another 2 tonne of chippings really, but it will do for now. It has a thick DPM layer under it, so it'll be fine for a while.
    I'll leave it a few more days so the concrete can set a bit more around the posts, and then the range can go on top.
    Then I'll make the felt roof and insulation to cover the range.

    https://ibb.co/c84NBp

  15. #45
    Join Date
    Dec 2012
    Location
    Newport, South Wales
    Posts
    848

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •