Results 1 to 15 of 15

Thread: Pellet carriers for Hunting

  1. #1
    Join Date
    Sep 2018
    Location
    Maidstone
    Posts
    5

    Pellet carriers for Hunting

    What do you single loading guys use for carrying pellets safely when hunting. Normally I have 2/3 magazines pre-loaded but just bought single tray to try in the rifle. Thanks

  2. #2
    Join Date
    Oct 2008
    Location
    Cambridge
    Posts
    747
    A pellet pouch!

  3. #3
    Join Date
    Dec 2011
    Location
    blackburn
    Posts
    2,032
    Make a holder from a small square of old Wellington.
    Poke holes in it , put the pellets in and hang around your neck.
    Simples
    Last edited by Alakar; 14-09-2018 at 12:29 PM.

  4. #4
    Join Date
    Jul 2016
    Location
    Grantham
    Posts
    1,348
    Same as above except i used a piece of old foam sleeping mat

  5. #5
    Join Date
    Sep 2018
    Location
    Maidstone
    Posts
    5
    Thanks chaps

  6. #6
    Join Date
    Mar 2011
    Location
    loughborough
    Posts
    838
    I lube my pellets so I use a tobacco pouch .

  7. #7
    Join Date
    Jun 2011
    Location
    middlesbrough
    Posts
    8,809
    Yep, I have a bit of welly boot on a length of cord and punched holes in it with a belt hole punch
    LOOKING FOR A BSA ULTRA IN .177 and .25

  8. #8
    Murphy is offline Cooee! Chase me you naughty boys!
    Join Date
    Aug 2003
    Location
    Wigan
    Posts
    22,357
    I have a nice hand warmer pocket full of pellets.

    The fluff aids accuracy.
    Master Debater

  9. #9
    Join Date
    Sep 2018
    Location
    Maidstone
    Posts
    5
    Quote Originally Posted by crowbar View Post
    I lube my pellets so I use a tobacco pouch .
    Just a plastic pouch or something more fancy

  10. #10
    Join Date
    Jul 2018
    Location
    Macclesfield
    Posts
    218
    I made up a little foam block that sticks to the cylinder with magnets, keeps them handy enough. In every other hole is a thin magnet, gaffer tape across the back secures the magnets and stops and marking. Holes are ‘drilled’ into the foam by hand with sharpened section of a telescopic aerial.


  11. #11
    barrel's Avatar
    barrel is offline Work is the refuge of people who have nothing better to do
    Join Date
    Jul 2008
    Location
    Edinburgh
    Posts
    9,035
    Quote Originally Posted by don1971 View Post
    I made up a little foam block that sticks to the cylinder with magnets, keeps them handy enough. In every other hole is a thin magnet, gaffer tape across the back secures the magnets and stops and marking. Holes are ‘drilled’ into the foam by hand with sharpened section of a telescopic aerial.

    Absolutely love it mate.

    Kindest regards

    Barrel
    IF I WALKED ON WATER PEOPLE WOULD SAY I COULD NOT SWIM !

  12. #12
    Join Date
    Aug 2015
    Location
    manchester
    Posts
    7,674
    Quote Originally Posted by Simshaz View Post
    What do you single loading guys use for carrying pellets safely when hunting. Normally I have 2/3 magazines pre-loaded but just bought single tray to try in the rifle. Thanks
    Item number: 223116042381. I prefer them to the Wilkins pellet pouch that I paid nearly £30.00 for.

    A.G

  13. #13
    Join Date
    Apr 2007
    Location
    Maidstone
    Posts
    2,286
    Quote Originally Posted by Alakar View Post
    Make a holder from a small square of old Wellington.
    Poke holes in it , put the pellets in and hang around your neck.
    Simples
    I didn't have an old wellie so I drilled holes in my current pair. I can carry approx 450 .177 on my left foot and 320 .22 on my right foot. It's a little heavier, but good calf muscle training. Working well at the moment, just a little concerned about the winter months.
    I do have a spare child's wellie that I found upside down on a garden gate the other day whilst walking the dog. I was thinking of fashioning a funnel from a used marigold glove to stretch over the top, this way I could probably fill it with a couple of tins - I thought it would be ideal for speed loading.
    I do have detailed cad drawings of both if anybody is interested.

  14. #14
    Join Date
    Mar 2011
    Location
    loughborough
    Posts
    838

    Type ?

    Just the plain plastic pouch and put it in your hand warmer pocket (stops fluff ) and keep cosy .

  15. #15
    Join Date
    Dec 2008
    Location
    sunderland "north east"
    Posts
    6,429
    I have these things on my coat called pockets they work just fine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •