Has anyone used an SMK CP1 Co2 pistol?

[zooma]

This slips over the front up to the original sight blade so no modification of the pistol necessary, just secured with a grub screw at the bottom. The recesses in the bottom will take two .44 cal lead balls. This gives a cleaner front sight blade but could easily be modified to give a longer sight base, exhaust ports or made longer to take more weights.




I'll be thinking about a palm shelf of some sort next.

Even better - just slip it on over the existing barrel and tighten a grub screw - what could be easier?

If I align my Love21 with my Morini 162ie the following measurement may be handy if you are considering increasing the sight base and adding exhaust ports:-

Aligning the rear sight blades with each other shows the Lov21 to be 80mm shorter (when measured from the end of the protruding steel barrel to the tip of the Morini's ported muzzle weight). Quite a nice extension opportunity to increase the sight base, improve the balance and add exhaust ports (possibly).

A palm shelf would make a big difference to being able to reliably repeat the grip each time the pistol is held.

These two mods would certainly shake things up a bit and give a budget pistol a massive upgrade!

[nogolem]

wonderful ! I admire people that are able to draw in 3D..
would you sell or share it over thingiverse ?
bonsoir !

[1066]

wonderful ! I admire people that are able to draw in 3D..
would you sell or share it over thingiverse ?
bonsoir !

Thank you, unfortunately I won't be putting it on Thingiverse but if you are interested in one PM me.

[1066]

A palm shelf would make a big difference to being able to reliably repeat the grip each time the pistol is held.

These two mods would certainly shake things up a bit and give a budget pistol a massive upgrade!

Here you go Bob - Fully adjustable palm shelf for Lov 21 now done.

[zooma]

Here you go Bob - Fully adjustable palm shelf for Lov 21 now done.

Yup - must have one of those Allan.

[barbusg60]

Here you go Bob - Fully adjustable palm shelf for Lov 21 now done.

Allan, Ive sent a pm but your inbox is full I think.
Cheers,
Rob

[nogolem]

I have advertised your designs on the french airgun forum.
I'll wait a little until I PM you...lost my job.
:-(

[1066]

Allan, Ive sent a pm but your inbox is full I think.
Cheers,
Rob

Thank you chaps - I've now cleared a bit of space in my mail box.


I've changed the barrel weight front end a little to accept variable front sight inserts. It takes two lead .44 cal lead balls, each weighing 140 grains.

[zooma]

Thank you chaps - I've now cleared a bit of space in my mail box.


I've changed the barrel weight front end a little to accept variable front sight inserts. It takes two lead .44 cal lead balls, each weighing 140 grains.

That looks really good!

With your adjustable palm shelf it will make a really good upgrade.

[1066]

Yours will be in the post tomorrow Bob.

[zooma]

Yours will be in the post tomorrow Bob.

Thanks Allan - much appreciated.