Steel tubing

[joffy]

Try here https://maccmodels.co.uk/materials-m...teel-tube.html or here https://www.metals4u.co.uk/

First one is a handy site

[don1971]

First one is a handy site

5 minutes up the road from me, and very reasonably priced.

[joffy]

5 minutes up the road from me, and very reasonably priced.

Similar to chronos Ltd

[joffy]

I found some 30mm od 24mm id maybe get 0.5mm machined off it?

[don1971]

I found some 30mm od 24mm id maybe get 0.5mm machined off it?

I would always work on the assumption you’ll need to machine finish it. Stock materials are never truly round.
How long does the finished tube need to be?

[joffy]

I would always work on the assumption you’ll need to machine finish it. Stock materials are never truly round.
How long does the finished tube need to be?

Less than 4" but I won't know until I get to strip the action to get measuring

[T 20]

These are the tube specs for the tube that Bigtoe sent me to sleeve my 35 down --- no refinishing needed on ID or OD. :-

https://www.hublebas.co.uk/products/...1-c31776df7d90