I've read what I could find on the remedies. Guides/sleeve/spring fit & finish etc
What's the current thinking. Working well other than the boing.
Thanks for looking.
I've read what I could find on the remedies. Guides/sleeve/spring fit & finish etc
What's the current thinking. Working well other than the boing.
Thanks for looking.
deejayuu,
Firstly, the fit of the guide & top-hat - another Goldilocks situation - the guide must not be too loose, not too tight, but just right !
I have find that spraying the spring (after a thorough de-greasing) with a three (3) light coats of dry moly spray (I use Ambersil) helps as well. The advantage of this is that it does not throw off the spring like grease.
Finish the ends of the spring well - to at least 600 'grit', and use thin, well lubricated, slip washers on top of top-hat, and under spring on the guide.
If you want to buy the guides & top hat, or a full drop-in kit, I recommend Wonky Donky, Welsh Willy or Shauny (from the 'other' forum) - their workmanship is excellent.
Have fun & a good weekend
Best regards
Russ
I too recently bought a TX200. Very happy with it in general, but it twangs worse than Zeberdee. I cured mine with a simple drop in spring guide and top hat kit from Tinbum Tuning. Approx £25 and twang gone. Considering the price (and recent price increase) Air Arms surley could rectify this problem.
Theoben Fenman, Theoben Scirroco 2000, BSA Cadet Major, Webley Premier MK2, ASI Sniper!
Well is it a twang or boing?
Master Debater