https://imgur.com/a/O6HXAir
getting to the point where I'm risking the stock being too weak or breaking through to the inletting
It's evolving mate - keep at it 👍
All of the above.
https://imgur.com/a/O6HXAir
getting to the point where I'm risking the stock being too weak or breaking through to the inletting
AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/
.. maybe
https://imgur.com/a/U7D7bDb
Just need to figure out how to mount a scope
AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/
That's an option I'm looking into but reach forward mounts don't reach forward enough
https://imgur.com/a/inbdTMq
For a standard sized scope it needs to be mounted over the loading port, the option of a compact scope is an avenue I'll look into.
Something like this may be an option https://www.aliexpress.com/item/Tact...772b4c4dO5s1QY
But something similar to this is what I'm looking for https://www.krale-schietsport.nl/en/...specifications
AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/
Short clip showing loading ans firing
https://youtu.be/ivrqRNBkYYg
and a couple of pics how it looks now
https://imgur.com/a/eFDNYDA
AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/
Weaver rail which is a Keymod Handrail modified to fit https://www.aliexpress.com/item/FIRE...27424c4dEHfWpA
Luckily found this one that was the correct internal diameter.
Current set up has 1" riser blocks but is still 10mm lower than needed.
Waiting for a UTG Super slim riser and high weaver rings for final set up.
AA TX200 MK2 .177, MK3 Barrel, long stroked & shortened T/P
AA TX200 MK3 HC .177, 22mm internals, shortened T/P
http://www.anstonftc.co.uk/