did you get any batteries?
Guys,
Just got one of these from Uttings and I cant get the thing to work!
Any tips?
Nealsey
I'm back.
did you get any batteries?
Yep batteries included for a change.
It lets me set it and everything but won't register the pellet travelling through it?
Nealsey
I'm back.
Try fitting it the other way round..!!
The ox is slow, but the earth is patient.
tell us what gun you are using it on, you need to be carefull about getting the pellets path level with the sensors too.
have not had one for a while so cant help much
Guys,
I have just got it running with me .22 Venom Viper, but it won't register the
Daystate .177 Sport.
Any suggestions?
Nealsey
I'm back.
I have one of these, you must line up the barrel so that the pellet fires through the middle of the sensors I also found that leaving as big a gap as possible between the end of the barrel/silencer and the first sensor worked better. I slide the part of the cb625 that holds it to the barrel until its flush with the end of the barrel/silencer.
Got 1 from JS Ramsbottoms worked great for a few tests then gave up the ghost checked everything possible eg. carefull alignment with sensors, batteries but still no luck - so it went back to the sender 4 a refund no prob.
When you say "won't register" do you mean absolutely nothing or do you get "bad" messages?Originally Posted by Nealsey
Is it a Mk 4?
best regards
Robin G Hewitt
Are you suggesting they all "give up the ghost" after a few shots? I'm just a bit puzzled why you gave up so easily if, as you say, it was working great???Originally Posted by Tinshooter
Perhaps you didn't like the colour
This is a top piece of kit which is very user friendly...... i can only presume you haven't figured it out
Even though it's new, it could be flat batteries.
Had mine a year, it's got the odd gun shot wound ( don't they all ? ) It did stop working a while back but new batteries sorted it.
Steve
Guys,
I had it working with the .22 last night but the .177 pellets seemed to fly through the
unit without the unit recognising anything having passed acroess the sensors.
The fact that it registers the .22 tells me the unit is functioning and it will probably be down to allignment, distance from the barrel end or something along those lines.
I will try to get the .177 aligned this weekend, but I am a bit put out that my loveley Viper is only putting out just over 9ftlbs
Many thanks for the comments and info.
regards
Nealsey
I'm back.
I check the alignment by pushing a plastic rod down the barrel through the Combro this also stops you shooting it
Steve
Some mistakes are too much fun to only make once
Was it dark outside when you did it.As I have had bad readings when trying it without any daylight.Steve