Edgun Leshiy trigger mod

[YorkshireDave]

I changed mine from an M4 over travel screw to an M5 spring plunger, works a treat. Does take a bit of fiddling with the adjustment though, to get the sear to reset every time. Before the hater's start, I do agree it should have had a better trigger from the outset given it's cost.

John

I must have been blessed with the adjustment on mine, got it right first time, I advanced the screw about 1/12 of a turn at a time until the gun stopped cocking and then backed it off 1/12 of a turn and it worked. Put about 50 pellets thru since and it's still working fine, didn't bed in and need re-adjusting although I know that might still happen.

Is there a reason you went up to M5 with your spring plunger?

Totally agree about the standard trigger, no way I could live with it as it was, we're lucky that it fixes so easily.

[JLB]

I must have been blessed with the adjustment on mine, got it right first time, I advanced the screw about 1/12 of a turn at a time until the gun stopped cocking and then backed it off 1/12 of a turn and it worked. Put about 50 pellets thru since and it's still working fine, didn't bed in and need re-adjusting although I know that might still happen.

Is there a reason you went up to M5 with your spring plunger?

Totally agree about the standard trigger, no way I could live with it as it was, we're lucky that it fixes so easily.

I went to an M5 spring plunger as I couldn't get the sear to reset with an M4 ball plunger. The M5 has more over travel which allowed the sear to reset.

John