HW springer barrel swop.

[Bellycrawler]

I want to change the .22 barrel on my HW80 to .177 & keep the one fitted ready to replace. Question is what barrels can I fit & if needed what cocking arms fit. At a guess all break barrel springer ones fit but are the cocking arms also the same ??

[T 20]

85,90,95,98 barrels are interchangeable.

All the above use the same cocking arm except for the 90.




All the best Mick

[Bellycrawler]

85,90,95,98 barrels are interchangeable.

All the above use the same cocking arm except for the 90.




All the best Mick

Ta muchly, helps a lot.

[averageplinker]

It is possible to get a "quick release" pivot pin thingy to make it easier and quicker to change barrels and also means you only need one cocking lever.

[Bellycrawler]

It is possible to get a "quick release" pivot pin thingy to make it easier and quicker to change barrels and also means you only need one cocking lever.

Any idea where from ??????

[Geezer]

Any idea where from ??????

Venom/V-Mach used to do one.

I believe others do copies.

[joffy]

Any idea where from ??????

Get a piece of 5mm silver steel with a m3 thread through the centre...counter sink headed screws fit nicely

[joffy]

95 and 90