I have a BSA Airsporter Mark 2 with the 2 separate scope ring grooves. The gap is pretty wide, are there any scope rings that will fit these. The open site folds down and is to me not the easiest to use effectively.
I have a BSA Airsporter Mark 2 with the 2 separate scope ring grooves. The gap is pretty wide, are there any scope rings that will fit these. The open site folds down and is to me not the easiest to use effectively.
Three quarter of an inch dovetails,protek supplies perhaps?
I think the wide dovetails were designed to accept mounts by Parker Hale.
Lakey
Dovetail are more like 5/8th inch?
Here is the answer but been out of stock forever.
http://www.airgunspares.com/store/pr...AASADAPTBLOCK/
Good Morning.
A few years back I was having the same problem. I sourced some mounts through Michael Tawn.
They were Sportsmatch TO48. They also fit the Mk1 and Mk2 Meteor they did the job perfectly.
Hope this helps.
Musicman.
Two piece medium height one inch tube mounts available from Mr Knibbs at £25.
You're spot on flint, I bought this set of Japanese 5/8" mounts from the Melbourne vintage airgun fayre and they fitted my mk2 Meteor superbly, The mk1/2 Meteors had exactly the same types of short scope railes that the mk2 Airsporter had (Apart from the transitional mk2/mk3's that had one pair of narrower dovetails cut in)
Cheers, John
for my gunz guitarz and bonzai, see here
www.flickr.com/photos/8163995@N07/