Hi guys,can anyone tell me if you can fit a huma Reg to a day state huntsman classic with a standard length tube, I think it would look better than the regal which has a longer tube.
Hi guys,can anyone tell me if you can fit a huma Reg to a day state huntsman classic with a standard length tube, I think it would look better than the regal which has a longer tube.
I think the regal reg would fit size wise but the single piece tube is going to be an issue for removal later as the valve has to be removed with a special tool from the filler side, with a reg in the way that would be..... tricky unless you in some way make a device to pull the reg and plenum chamber back out again
also you would need to drill a ventilation hole in cylinder at exactly the right spot to allow the reg to breath, all possible but not easy to get right and very easy to get wrong,
I am sure that if it has a one piece cylinder it can't be done. Something about it on the Huma site too.
A.G
"corners should be round" Theo Evo .22/.177 - Meopta 6x42, DS huntsman classic .20 vortex razor LH 3-15x42 under supervised boingrati tuning by Tony L & Tinbum, HW77 forest green - Nikon prostaff 2-7x32 plex.