Results 1 to 15 of 117

Thread: Crosman Town & Country 107

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,532
    Interesting I applied my new Damping grease “Kilopoise“ that sealed my taps to the probe of my 108. It did eliminate any movement of a tissue put on the breech fired with 6 pumps. Did not seem to change my FPS output, but I assume my leakage was slight? “Kilopoise” is interesting stuff, not sure it’s appreciated in it Country of origin? Lol

    Also not sure that this will be a lasting effect as more and more pellets are fired. But Kilopoise is the stickiest most bizarre compound I have ever encountered.
    Last edited by 45flint; 29-11-2018 at 07:36 PM.

  2. #2
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,069
    try lapping the probe to the barrel leade Louis

  3. #3
    Join Date
    Jan 2016
    Location
    Wooster
    Posts
    3,532
    Quote Originally Posted by --ped-- View Post
    try lapping the probe to the barrel leade Louis
    Recommended by Gaylord as well in his review; but I’m not really familiar with this process?

    “A real fanatic might have used some automotive valve-grinding compound to hand-lap the front of the bolt into the rear of the barrel; but this wasn’t my rifle, so I left it at that.”

  4. #4
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,069
    same process as lapping valves in engines just add a bit and turn repeatedly

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •