Does a ratcatcher stock fit the Crosman 1300 medallist?

[averageplinker]

Hi,
I bought a cheap 1300 a while back with a crumbling grip. I started to make a stock for it but never finished it. Does anyone know if I could fit a ratcatcher stock instead? Are the grip frames similar enough?
Cheers Rich.

[harvey_s]

The frames certainly look like they would accept the standard stock OK...

[Shed tuner]

the 2289 backpacker is a 1322 with a 2250 stock ( well, except for the pin to retain). so basically, yeah.

i have one on my 1322 rat gun.

[--ped--]

it will fit but not correctly the 1300 uses the same grip as a phase 1 1322/77 and they had a specific stock for that frame which was then altered to fit the later 13xx and 22xx frames
the original 1300 stock is a bit shorter than the current stock as well

[averageplinker]

it will fit but not correctly the 1300 uses the same grip as a phase 1 1322/77 and they had a specific stock for that frame which was then altered to fit the later 13xx and 22xx frames
the original 1300 stock is a bit shorter than the current stock as well

Cheers I had a feeling the grip frames on this older pumper was a bit different to the newer pumpers and ratcatcher/busters. Might see if I can try one to see if it is worth adapting as I doubt I will find the proper one for a 1300.
Cheers.

[johnbaz]

I was told this grip (At the right) was off a 1300, Not sure though as I don't have a 1322 and more to see if it doesn't fit!!




John

[--ped--]

colour looks right for a 1300 John but it'll fit most of the pistols from a 105 up to the 1st phase 13xx's
if you still have it and don't need it I'd be interested as I have a 1300 that's missing the grip

[the green man]

my medallist 1322 grip will not on my 2240

[averageplinker]

Looks like I will be keeping an eye out for a stock and/or grips a Kempton Park next week 😀