Results 1 to 13 of 13

Thread: Scoring A 25m Benchrest Target Using 0.177

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2010
    Location
    Grimsby
    Posts
    632

    Gauging .177 in .22 comps

    The gauge you need is sold in the NSRA shop and is listed as the 0.22A. it has a slower taper than a 0.22 plug gauge so when pushed gently into the .177 shot hole it will centre itself properly to enable reading of the .22 oversize scoring ring when it touches the target.
    The NSRA scoring course suggests the use of the plug gauge you have pictured with the wobbly spring on top can actually distort the score reading as light distorts when passing through the magnifying glass.
    Regards Neil
    Good Deals with Mikewaring, ggggr, watchsapart, Majex45, Nhill, zebedee71,Eredel,Hawksthorn,Red Bob, Stanbridge,Barrow_Matt,Mr.Fixit-Norm, turbo33 .atb thankyou all Neil

  2. #2
    Join Date
    Dec 2016
    Location
    Camberley
    Posts
    67
    Many thanks Ragle and martini for you help and replies!

  3. #3
    Join Date
    Dec 2009
    Location
    Exeter
    Posts
    1,026
    Richard

    There are pictures of scoring targets in this lot here from lastweekend: https://www.benchrestuk.com/gallery/...ishead-shoots/

  4. #4
    Join Date
    Dec 2016
    Location
    Camberley
    Posts
    67
    Quote Originally Posted by Tone View Post
    Richard

    There are pictures of scoring targets in this lot here from lastweekend: https://www.benchrestuk.com/gallery/...ishead-shoots/
    Many thanks Tone. I’d taken a look through those and it looked like a fun afternoon.

    Is it an organisation anyone can join in order to enter postal competitions?

  5. #5
    Join Date
    Dec 2009
    Location
    Exeter
    Posts
    1,026
    Quote Originally Posted by rmwesley View Post
    Many thanks Tone. I’d taken a look through those and it looked like a fun afternoon.

    Is it an organisation anyone can join in order to enter postal competitions?
    Yes mate, you can join no problem and do the postals when they start next year.

    They are also talking about a world postal as none runs at the moment.

    Contact here and let me know if any problems: https://www.benchrestuk.com/get-in-touch/

  6. #6
    Join Date
    Dec 2016
    Location
    Camberley
    Posts
    67
    Quote Originally Posted by Romah View Post
    Cheers Roman, v useful

    Quote Originally Posted by Tone View Post
    Yes mate, you can join no problem and do the postals when they start next year.

    They are also talking about a world postal as none runs at the moment.

    Contact here and let me know if any problems: https://www.benchrestuk.com/get-in-touch/
    Thanks Tone, will look into it.

    Just in case anyone really wants to know, the link I originally posted is just a magnifying glass for a 177 pellet hole. It doesn’t enlarge it to a 22 pellet hole. What I was actually looking for was the gauge linked to by Basharbob and martini.

    Cheers all!

  7. #7
    Join Date
    Aug 2010
    Location
    SHIPLEY west yorks
    Posts
    247
    Hello rm,have a look at Yorkshire Smallbore Shooting website and select comps. BR, for the league rules, NSRA rules are the same.
    The rifle uses no rear support,butt in shoulder and non shooting hand providing support to the underside,no fancy gear so cheaper!!remember its Yorkshire!
    The Yorkshire own design target is inward scoring except when gauging a +1 !!available as 20 yds or 25 yds.cheaper than the NSRA target,its a big league !!!
    Your club can affiliate to Yorkshire for a few pounds or you as an individual,summer and winter leagues.
    Don.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •