Might be a stupid question but forgive me

[Ragle Jnr]

Another plug for G96, I recently did a webley Vulcan, the hard part is the prep! It took three coats to build up a decent depth, and I found flushing with boiling water gives a better finish. Give it a try, you can always remove it and get it done professionally if you don't like the results. HTH David

[averageplinker]

Another plug for G96, I recently did a webley Vulcan, the hard part is the prep! It took three coats to build up a decent depth, and I found flushing with boiling water gives a better finish. Give it a try, you can always remove it and get it done professionally if you don't like the results. HTH David

Please bear in mind that RichardH posted once that cold blue can be hard to remove completely and can make subsequent attempts at hot salt bluing unsuccessful.
Rich.

[Hsing-ee]

Send it to RichardH, it is not THAT expensive and the job he does is several times more marvellous than the factory jobs.

Remember that cheap is rarely good value. People have dribbled over the blacking on the Feinwerkbau Sport he did for me once, it was that awesome.