Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: Sterling airguns

  1. #1
    Join Date
    Jun 2005
    Location
    breedon on the hill
    Posts
    1,065

    Sterling airguns

    Not been on for a while and may have lost touch, but was wondering if the rifles that Sterling were thinking of making are actually going to happen?

    Had a very quick squint through the net but couldn't find anything....

  2. #2
    Join Date
    Aug 2013
    Location
    Stowmarket
    Posts
    407
    No. They went wobbly bits up a while back.

  3. #3
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,324
    seems not !
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  4. #4
    Join Date
    Jun 2005
    Location
    breedon on the hill
    Posts
    1,065
    Ok, thanks chaps.

    I used to have a hr83, it wasn't brilliant but i liked it in a funny sort of way

    Id have been interested to see how the new ones were...

  5. #5
    Hsing-ee's Avatar
    Hsing-ee is offline may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
    Join Date
    Dec 2001
    Location
    Glasgow
    Posts
    18,217
    Just wait a few years then you will be able to download the specs on your phone and print off whichever Sterling takes your fancy on your Lenovo 3-d metalloplastic printer.

    Alternatively, have a look at the nightmare contraption they nearly inflicted on us... and be glad you can buy a ProSport instead.

    https://www.youtube.com/watch?v=Tw4IVzpu7Kg

  6. #6
    Join Date
    Jan 2011
    Location
    Swansea
    Posts
    5,046
    Quote Originally Posted by Hsing-ee View Post
    Just wait a few years then you will be able to download the specs on your phone and print off whichever Sterling takes your fancy on your Lenovo 3-d metalloplastic printer.

    Alternatively, have a look at the nightmare contraption they nearly inflicted on us... and be glad you can buy a ProSport instead.

    https://www.youtube.com/watch?v=Tw4IVzpu7Kg
    id rather my park rh93 to that contraption. the cocking lever the same side as you have to put your hands to open the breech i know there is a safety but if that lever did come forward as you used the breech thats would be nasty. also £1500 bugger that. no wonder they went bust.

  7. #7
    Join Date
    Jun 2005
    Location
    breedon on the hill
    Posts
    1,065
    Probably for the best that they didn't bother by the looks/ sounds of it

  8. #8
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Tony Belas is now back at Daystate too.
    Llisten to Tony here https://youtu.be/NSs1QoQTa3I?t=2514

    He never thought it would get built . looks like he was right .

    Another Graham Trim airgun that goes no where like the Webley Paradigm.
    Last edited by bighit; 11-12-2018 at 10:55 PM.

  9. #9
    Join Date
    Mar 2003
    Location
    Farnham, Surrey
    Posts
    12,192
    Quote Originally Posted by bighit View Post
    Tony Belas is now back at Daystate too.
    Llisten to Tony here https://youtu.be/NSs1QoQTa3I?t=2514

    He never thought it would get built . looks like he was right .

    Another Graham Trim airgun that goes no where like the Webley Paradigm.
    A great shame-it looked promising.
    Never go off half cocked....

    All lies matter

  10. #10
    Join Date
    May 2010
    Location
    Tamworth
    Posts
    1,487
    I wonder if you can get the prototypes? I wanted the Webley

  11. #11
    Join Date
    Oct 2005
    Location
    harlow essex
    Posts
    500
    Can’t believe tony b is back at daystate he said on one of the videos on YouTube that when they launched the mk3 they had it in the tank and in the pond it did not work after they got it out the water Evan though they told everyone it did and he talks about many other problems with products that have been covered up so many lies they tell the public it’s not a pop at tony b but he seems to promote anything hope this don’t offend it’s not meant to

  12. #12
    Join Date
    Apr 2001
    Location
    Wet Cold Downtown Leicester
    Posts
    18,523
    A salesman has to earn a living dude...
    A man can always use more alcohol, tobacco and firearms.

  13. #13
    Unframed Dave's Avatar
    Unframed Dave is online now World pork pie juggling champion three years straight
    Join Date
    Jul 2012
    Location
    Norwich
    Posts
    13,395
    Quote Originally Posted by Hsing-ee View Post
    Alternatively, have a look at the nightmare contraption they nearly inflicted on us... and be glad you can buy a ProSport instead.

    https://www.youtube.com/watch?v=Tw4IVzpu7Kg
    Never seen that before, thanks, another nightmare incoming tonight.

    Dave
    Smell my cheese

  14. #14
    Join Date
    Jan 2011
    Location
    Swansea
    Posts
    5,046
    Quote Originally Posted by Unframed Dave View Post
    Never seen that before, thanks, another nightmare incoming tonight.

    Dave
    the park rh 91/93 rifle was a quality rifle. that contraption is a safety nightmare. looks as good as quozzie modo. why the hell did they put the breech bolt on the same side as the sidelever????
    Last edited by WILBA; 12-12-2018 at 12:05 PM.

  15. #15
    Join Date
    May 2015
    Location
    Andover
    Posts
    404

    Shame

    Quote Originally Posted by bighit View Post
    Tony Belas is now back at Daystate too.
    Llisten to Tony here https://youtu.be/NSs1QoQTa3I?t=2514

    He never thought it would get built . looks like he was right .

    Another Graham Trim airgun that goes no where like the Webley Paradigm.
    A shame they went tits up I liked the look of what they were trying to produce. Surprised that TBb said that after all I’m sure he was happy taking their money when working for them.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •