Results 1 to 7 of 7

Thread: Daisy Powerline 922 help

  1. #1
    Join Date
    Aug 2018
    Location
    Norwich
    Posts
    62

    Daisy Powerline 922 help

    Just been given a Daisy Powerline 922 which needs some TLC, I know they are not of great value but just want to get it back to a reasonable working condition again and add it to my growing collection.

    Does anyone have a parts diagram or manual?

    At present nothing apart from the pump lever is movable (but no pressure felt there), magazine, safety and cocking level all jammed any advice on strip-down would be appreciated.

    Regards

    Steve

  2. #2
    Join Date
    Dec 2017
    Location
    Leeds
    Posts
    692
    Just found this on the net. I know nothing about these but hope this helps.


  3. #3
    Join Date
    Apr 2001
    Location
    Wet Cold Downtown Leicester
    Posts
    18,523
    I have a scrap 922 if you need any bits
    A man can always use more alcohol, tobacco and firearms.

  4. #4
    Join Date
    Aug 2018
    Location
    Norwich
    Posts
    62

    Daisy Powerline 922 help

    Thanks for the diagram Huttles94 that's a big help.

    Richard, thanks, I'm sure there will be some parts to replace, hopefully get a chance over the Christmas break to get it stripped down.

    Steve

  5. #5
    Join Date
    Dec 2016
    Location
    leeds
    Posts
    2,061
    there is a few variants of them I think US made and China made and the valve and seals are different and don't interchange
    if it has diecast pump arm and sidecases I think it's US made
    try not to damage parts disassembling as you'll have to look in the US for spares generally I've been looking for a barrel for one for a while and a mag for a 922

  6. #6
    Join Date
    Dec 2018
    Location
    Hull East Yorkshire
    Posts
    1,396
    I had one of these ,brand new was a cracking gun,had the .177 as well.

  7. #7
    Join Date
    Aug 2018
    Location
    Norwich
    Posts
    62

    Daisy Powerline 922 Spares

    Quote Originally Posted by RichardH View Post
    I have a scrap 922 if you need any bits
    Richard, cannot PM you as your box is full.
    Is this 922 still available for spares, I need the rear sight adjustment stepped wedge if you have it.
    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •