Weihrauch HW100 T has become completely inaccurate

[old goat]

Maybe the gnat is stuck in your Barrel and that's the problem

On the serious side what I have had confirmed from the thread on the WOC is that you need to put a lot of pellets through the barrel after a clean to get it back to good accuracy, so give that a go

[jepho]

Maybe the gnat is stuck in your Barrel and that's the problem

On the serious side what I have had confirmed from the thread on the WOC is that you need to put a lot of pellets through the barrel after a clean to get it back to good accuracy, so give that a go

Yes, I shall make it my mission to shoot a lot of pellets when my rifle is returned.

https://media.tenor.com/images/7b7b0...fbca/tenor.gif

[rapidave]

if you do clean barrel don't use wire brush as some people have suggested. you will only score your barrel ,it's not hard steel it is soft.

[jepho]

if you do clean barrel don't use wire brush as some people have suggested. you will only score your barrel ,it's not hard steel it is soft.

Yes, thank you. Understood. I know a little about working with metal and would not want to risk marking the barrel's smooth surface.

[woodpigeon]

is your gunsmith known to the forum?keeping an eye on this thread with great interest

[jepho]

is your gunsmith known to the forum?keeping an eye on this thread with great interest

Hello. Are you my gunsmith (fingers Malone?) if yes, I claim my £5.

He may be but I would not know. I will have to ask him when I get to chat with him.