Catastrophic ? Prosport part 2

[deejayuu]

AIR ARMS PROSPORT RECOVERY PROJECT. Serial No. Calibre .177 01 10 2019
This arrived “because you like a challenge or may be useful for spares”

Lovely stock as you see. Shooting a bit wayward but ideal for running boar maybe

The owner didn’t want to talk about the cause of the damage.
Today seemed a good time to have a go at it so started with the stock.
Neat break so easy enough to align for pilot drill using our dedicated gauge

Drilled a clearance hole in fore end so a screw would pull the joint together firmly.


35 mm curtain pole jigged a bit to give firm clamping pad. Dithered over choice of glue for it but went with D4 mainly because the Cascamite had gone crummy and local shops closed today.

Stripped the action while the stock was cooking and set about assessing the distortion. Almost within certain modern factory spec. Some would say.

If interested see next post. Hit image limit!!

[deejayuu]

Sighting through the bore shows the bend clearly although the photo isn’t good.

Barrel straightened and checked in our dedicated alignment jig! Would be interesting to have it on surface plate/vblocks/DTI or similar sometime but have to go with what we’ve got.

On with the stock. Clamp removed then thunder screw set in glue and fixed across fracture line.
Screw recess filled and smoothed to disguise the head. Only done for personal taste. Not really necessary and, wouldn’t, not intended to fool anyone.

Stock dents steamed, rubbed down with scotchbrite, and walnut oiled a few times.

Getting quite excited now.

Pistol grip ugly but sound

Back to where we started A most satisfying trip

[JerryD]

Nice work - but did you only straighten the shroud and not the barrel as well?

If the barrel is bent then the only way to straighten it is to remove the big nut from the cylinder at the transfer port and strip off the shroud. The barrel itself is only about 12-14" long from the transfer port, and fairly spindly.




.

[Unframed Dave]

Brilliant job. Nice work.

Dave

[jjjohn]

Very good job.....

[Murphy]

Soon to be for sale "As new, only a tin of pellets shot".