-
12g slug loading
I need to get back into this to make up loads for competitive target shooting.
I have used Vectan AS and A1 and A0 in the past with the Lee and Lyman "shuttlecock" slugs.
Never found either to be that accurate.
I have now got a Svarog mould that uses screw on base wads.
As I will be using these at Bisley discarding wads are no longer allowed.
The Lee and Lyman are undersized for the bore without being contained in a shot cup.
The Svarog slug is fatter.
I am using new cases and roll crimping.
I need loads to get out to around 90 yards.
AS is all gone but I do have maxam CSB5 and also A1 and A0 available.
Any one have any pet loads using these powders and slug?
-
Have a look at this thread from cast boolits forum it is mostly about the Svarog slug loading.
http://castboolits.gunloads.com/show...ian-slug-molds
-
Thanks for that.
Haven't been on castboolits for years.
Problem is all data from US sources for 12g slug is designed for knocking large animals over!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules