I "unscrewed" it to the neutral point where it was loose and squeezed a super glue gel into the joint and tightened it clockwise. I also removed the mesh disc that is supposed to filter the CO2 and replaced it with a 1 mm thick polyurethane flat washer with a single hole in it. This seemed to be a potential leak point if the main doughnut seal for the capsule is not fitting tight enough around its circumference. I also inserted a steel pin through the slide stop to reinforce it as it seems a fragile tiny plastic square. The next Eagle I get, will do a strip guide as there does not seem to be one on the net. Quirky little things like the eliptical section shape plastic rod that needs to be bent up to allow the pistol to be stripped. As said these pistols are good little performers.
Baz
https://i.imgur.com/uex4C1B.jpg
Originally Posted by Benelli B76
Dodgy Diana User
Posting Permissions
Reply With Quote