Results 1 to 5 of 5

Thread: Seeking advice on a LMBR R2A Chronograph....

  1. #1
    Join Date
    Dec 2017
    Location
    Halesowen near Birmingham UK
    Posts
    156

    Seeking advice on a LMBR R2A Chronograph....

    Hi Guys,

    I've purchased a LMBR R2A chronograph but I could do with a little help with the set up of the unit as the product instruction are basic.

    On the unit, one section in the set up shows a box with the saying "Distance Between Sensors Calibration" & the word "Gate".

    Can you inform me please with the distance (in millimetres) I need to input.

    Thank you in advance.

    Mike

  2. #2
    Join Date
    Feb 2015
    Location
    Perth
    Posts
    301
    See the other forum

  3. #3
    Join Date
    Nov 2012
    Location
    walsall
    Posts
    386
    I have an R2 and the book says 50mm. Also if you trawl the makers site there is a bigger manual on there which you can download.
    abellringer

  4. #4
    Join Date
    Dec 2017
    Location
    Halesowen near Birmingham UK
    Posts
    156
    Quote Originally Posted by abellringer View Post
    I have an R2 and the book says 50mm. Also if you trawl the makers site there is a bigger manual on there which you can download.
    abellringer
    Nothing in the instructions or on the manufacturer's web site but an email reply from LMBR says 50.15mm....

    Thank you for your replies....

    Mike

  5. #5
    Join Date
    Dec 2017
    Location
    Halesowen near Birmingham UK
    Posts
    156
    Hi Guys,

    One further question?

    In the manual of the R2A it shows a page section of set up and read out "Functions".

    Illustration box number 3 show a screen shot with Shots 153 and PF 177.

    What does PF stand for please?

    Cheers,

    Mike

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •