The Alecto is also known as .... Zoraki HP 01 if that helps with sourcing parts ?
HW77K .22, HW100KT .22, HW95K .22. AA TX200 MK3 .22. AA S410 MK3 .177. HW80 .25 HW30S .22. Pistols: Walther CP88 .177, Hatsan Mod25 Supercharger .22, HW45 Silver Star .177, Webley Alecto .177, SMK Victory CP2 .22
HW77K .22, HW100KT .22, HW95K .22. AA TX200 MK3 .22. AA S410 MK3 .177. HW80 .25 HW30S .22. Pistols: Walther CP88 .177, Hatsan Mod25 Supercharger .22, HW45 Silver Star .177, Webley Alecto .177, SMK Victory CP2 .22
Nah... worth the try .....I had my doubts though...... I think that would work better for a spring piston rather than a pneumatic.,most especially a leather sealed one........ Looking forward to my extended and threaded barrel. No silencer imports to US but I've already got one on the way from a US company to fit the M10x1.0 threads.
FWIW my Mk1 Alecto started leaking within a week or two, my RFD sent it back under warranty, it came back with a new valve system and it has been as good as gold ever since.
Good deals with these members
Hmmmmm.....nice .... Well at least I've found a parts source and have since ordered all those seals for the valve and compression tube.
FYI...,there is a little mod you can do to the Alecto where you get in it and turn the pressure valve racked to the right and you pick up about 20% more
power.......I did it to mine .....There was a nice vid about it ...In a week or two I'll have my new extended barrel with a froggy made suppressor.
I'll comment on it afterwards.
Mine certainly doesn't need the power turning up, it's quite punchy as it is!
(friendly FYI, we try not to talk about power mods here)
I suspect these guns will last a lot longer if shot mostly at 1 or 2 strokes; 3 strokes puts a bit too much stress on the internals I think, and is not particularly fun to cock for extended sessions.
Good deals with these members
Good deals with these members