Results 1 to 9 of 9

Thread: help please

  1. #1
    Join Date
    Jun 2006
    Location
    mansfield
    Posts
    1,620

    help please

    resized a batch of cases, come to seat bullet heads but there loose in the case ive tightened the the die down as far as it will go and really have to slam the handle down any ideas please, ive took a pic of the die if anyone wants to see, send email please, thanks in advance pb

  2. #2
    Join Date
    May 2009
    Location
    Reading
    Posts
    4,806
    what calibre what dies what press ?
    You Cannot Reason People Out of Something They Were Not Reasoned Into
    "Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby

  3. #3
    Join Date
    Jun 2006
    Location
    mansfield
    Posts
    1,620

    help

    what calibre what dies what press ?
    sorry,
    .223 lee die and lee press

  4. #4
    Join Date
    May 2009
    Location
    Reading
    Posts
    4,806
    go back to basics and set the Die up to the Lee instructions, sounds like you haven't got enough adjustment, if that doesn't work see if you can borrow someone elses die or take yours to the shop and ask them to check its not a fault with the die. Also have a look on youtube for how-tos


    https://www.youtube.com/watch?v=lKosnBtBlIs
    You Cannot Reason People Out of Something They Were Not Reasoned Into
    "Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby

  5. #5
    Join Date
    Jan 2010
    Location
    Reading
    Posts
    2,167
    which lee dies?

  6. #6
    Join Date
    Jun 2006
    Location
    mansfield
    Posts
    1,620

    help

    all sorted now, thanks

  7. #7
    Join Date
    May 2009
    Location
    Reading
    Posts
    4,806
    Quote Originally Posted by pigeonbasher1 View Post
    all sorted now, thanks
    so ? what was it?
    You Cannot Reason People Out of Something They Were Not Reasoned Into
    "Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby

  8. #8
    Join Date
    Jun 2006
    Location
    mansfield
    Posts
    1,620

    help

    just studied the utube vid you sent me, thanks again

  9. #9
    Join Date
    Dec 2008
    Location
    sunderland "north east"
    Posts
    6,429
    I had this problem in the past with lee collet dies turned out I had pushed the end off the die this was only alloy and me being a little heavy handed

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •