Results 1 to 15 of 38

Thread: .30cal HW80 Barrel @ Kempton

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,475
    I missed that... but I have to say, I completely fail to see the point... .25 I just about get, certainly at FAC 20 FP... but .30 on 12 or even 20FP springer !?!??!

    A .25 will weight anything from 19-25 grains, what do .30 start at, 35 grain ? so at 12 FP, that's about 400 fps ! even at 20 FP, it's only 500 fps
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  2. #2
    arnie2b Guest

  3. #3
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,475
    I've had Fac .22 AND .25 ... the .22 is great for up 35 FP.. i had the .25 @ around 56 FP, but it was just stupid really. used the rimmy instead. I did have a .25 eliminator at around 22 FP wth 20 grain H&Ns - great gun, as the range was limited by the shooter to 40 yards anyways. so I just con't figure of a use for .30 at such low power levels...
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  4. #4
    Join Date
    Feb 2006
    Location
    Farnborough
    Posts
    4,406
    Chaps are we forgetting that sometimes impractical things can be fun. I would like to see the hole a sub 12ftlb .30" pellet would make in a bean can!
    Probably an expensive to feed plinker but why not? Maybe the OP likes to have/collect unusual calibres?
    Each to their own fellas
    WANTED: Next weeks winning lottery numbers :-)

  5. #5
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,475
    true, it'd be interesting, just impractical
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  6. #6
    Join Date
    Apr 2009
    Location
    Rickmansworth
    Posts
    2,772
    Quote Originally Posted by Shed tuner View Post
    true, it'd be interesting, just impractical
    I understand your point mr b, as I too own FACair (.22, .25, etc). And it does have its place where mr bouncy rimfire does not - believe me! But I was asking if anyone had seen the 30cal barrel at Kempton? ‘Practicality’ is an opinion and point of view after all
    I was counting on you knowledgeable chaps, who often frequent Kempton and have an eye for such curiosities, may have more info on its existence + whereabouts. Failing that, I wonder if Steve Harper is still in business or available to chat to?
    'Windage & Elevation, Miss. Langdon - Windage & Elevation!'

  7. #7
    Join Date
    May 2011
    Location
    Saxmundham
    Posts
    1,512
    Steve Harper used to produce his own pellets for these .30 barrels. It was a 25 grain .25" Bisley Superfield bumped up to .30". They worked well.

  8. #8
    Join Date
    Apr 2009
    Location
    Rickmansworth
    Posts
    2,772
    Quote Originally Posted by averageplinker View Post
    Chaps are we forgetting that sometimes impractical things can be fun. I would like to see the hole a sub 12ftlb .30" pellet would make in a bean can!
    Probably an expensive to feed plinker but why not? Maybe the OP likes to have/collect unusual calibres?
    Each to their own fellas
    Thank you sir - correct - guilty as charged 😁
    'Windage & Elevation, Miss. Langdon - Windage & Elevation!'

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •