Sometimes you have to adjust the engagement screw as well to get the trigger you want.
Baz
https://www.airgunstocks.com/article...r-service.html
When adjusting the pull weight I must have screwed out the rear adjustment screw too far as the gun would cock but not fire untill I screwed it back in a touch, is this normal?. Also what poundage should a Record trigger be able to be adjusted down to?. Thanks for any advice as always.
Kindest regards
Barrel
IF I WALKED ON WATER PEOPLE WOULD SAY I COULD NOT SWIM !
Sometimes you have to adjust the engagement screw as well to get the trigger you want.
Baz
https://www.airgunstocks.com/article...r-service.html
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD
Taking the screw out too far makes the blade all floppy, generally this screw governs trigger weight as for exact weight I dont know.
The sear engagement torx screw does need to be adjusted sometimes, but be careful as from memory they have thread locker on them, I think T8 size. If there is creep on the second stage adjusting this screw will help. I would make the main adjustments with the trigger unit off the gun, much easier to actually see what is happening.