Registered User
Could any HW100 gurus give me some help on this please.
Filled gun to 200bar
Using Bisley Mags .177
After 80 shots down to 150bar ish
Shot No1 - 446fps
Shot No20 - 467
Shot No40 - 515
Shot No60 - 564
Shot No80 - 679
I've never had it apart, never messed with reg or hammer spring, only changed the cylinder to A&M
Could this be a problem with the hammer spring?
cheers
Matt
"I'm an enormously talented man, and there's no use pretending that I'm not.."
Registered User
Firstly you're better off with the standard cylinder rather than an A & M.Originally Posted by MattF
The fault is likely to involve the regulator, it could be dirt in the Belleville washers or the piston O ring faulty casing it to stick. It's unlikely to be the hammer spring or you'd be getting irregular readings across a charge.
Hope this helps.
Andy
Registered User
Give Shaun a bell, Matt - he’ll sort that no problem.
Put on heading 270, assume attack formation
Registered User
Cheers guys
Craig, I did wonder if Shaun had a play with them.
"I'm an enormously talented man, and there's no use pretending that I'm not.."
Registered User
Why better off with a standard cylinder as opposed to the A&M ?
Registered User
Do a google search.
Posting Permissions
Reply With Quote