Removing an Air Ranger Barrel

[Spanner.]

I have removed the shroud and taken out the 2 screws that come down through the top of the action but it is solid, even had it in a vice today but no joy. Is there anything else securing it?

[tinbum]

I have removed the shroud and taken out the 2 screws that come down through the top of the action but it is solid, even had it in a vice today but no joy. Is there anything else securing it?

Have you seperated the top and bottom of the receiver?

[Spanner.]

No I expected the barrel to come out without doing that? Watched a You Tube video of a guy removing a Wolverine barrel and it was just a case of taking out the 2 small screws and puling it out, is the Air Ranger different?

[tinbum]

It's three weeks since I did it, but I'm sure the TP holds it in place til seperated

[Spanner.]

What is the TP, sorry if I am being thick?

[Murphy]

You have to remove the breech.

Then the Transfer port.

Then its bolted from underneath.

[Spanner.]

OK thanks both!