Been years since I removed the air cylinder from my hw 100, does it just unscrew out of the gun or does the stock need to be removed?
Mine doesn't want to unscrew by hand easily and I don't want to force it.
Cheers
Ed
If there 8snt much air in... you could dry fre until it dumps and all pressure is released. May make it easier. Take care if it is aftermarket like an FX cylinder as you could actually unscrew the cylinde4 and leave the cylinde4 end in the guns action.
But if its an HW elephant truncheon steel it should unscrew. Taking the action out may assist with grip
In a battle of wits I refuse to engage with an unarmed person.
To one shot one kill, you need to seek the S. Kill only comes from Skill
If it's a stock cylinder then yes it should just unscrew and vent a tiny bit of pressure as it loosens. If it's aftermarket like A&M etc then you cannot remove it while there is pressure so you'd have to drain it before unscrewing.
I have a A&M on my hw100.
Empty as much gas as possible by dry firing.
Unscrew cylinder gently and slowly until the first hiss. Make tea. Repeat until cylinder free.
TTFN
N.
"The only difference between Men and Boys is the price they pay for their Toys."
TTFN
N.
"The only difference between Men and Boys is the price they pay for their Toys."
Thanks for the replies