Help o knowledgable ones
I Just had my AAS410 Chronod and no matter what weight the pellet it comes out at 9.1 Ft/Lbs. I want to tune it up to produce nearer 11 - 11.5 Ft/Lbs. How do I best go about this. Im told that if I Remove the little Torx screw to the right of the dovetail I will be able to use a very small allen key to adjust the OOmph. I this right or do I have to strip the gun to make the adjustment.

Or should I just leave it where it is.


PS the Chrono is bang on reliable