Can any one help with HW35 Vixen specifications

[venoman]

I have had two 2 HW35 Vixens brought in from the same owner, he bought both guns second hand. I have stripped both guns only to find they are different, gun one is .22cal it has the chrome plated piston and the standard steel guide also plated, the spring is the large factory one a leather seal and no piston liner .Gun two is .177cal piston and guide plated there is a liner tack welded into the piston its fitted with the 77/97 spring (the large 35 spring will not go into the liner) and its got a brass piston head conversion with an O ring. From what i can see both guns look as if they have been got at ?.

[Geezer]

In case these help:

http://www.airgunbbs.com/showthread....May-Vixen-HW35


http://www.airgunbbs.com/showthread....605-HW35-Vixen

http://www.airgunbbs.com/showthread....487-Vixen-hw35

[landymick]

Both have been changed I would say.

The spring should be plated along with the piston, guide & barrel catch.The piston has the thick liner with standard leather seal fitted ,T.P will be anything from 3.2 up to 3.6 on the ones measured so far.