Bad deal

[webb22]

Sorry to hear that mate. Not a good intro to the forum for your lad
Seemed like a nice falcon as well!
I think this is him also, as it was for sale under this guys profile but now been removed.

https://mypage.freeads.co.uk/liam-reid-1#.XQNalorTWfA

Hope you get it resolved...

[spartan]

I assume your taking about a falcon fn,12 ? if so just try backing of the sear engagement screw on the trigger block, its the rear screw, undo the nut and turn the allan screw anti clockwise, see if it holds then, two minute job .

[rapidresponse1]

hope you get it sorted bud

[T 20]

I assume your taking about a falcon fn,12 ? if so just try backing of the sear engagement screw on the trigger block, its the rear screw, undo the nut and turn the allan screw anti clockwise, see if it holds then, two minute job .

That's what I was thinking, Shaun, but I wasn't sure if the Falcon used the same unit as the Titan ?

He may need to back off the front screw as well if it's set to single stage --- a simple adjustment could save admin getting involved.


image.jpg



All the best Mick

[spartan]

That's what I was thinking, Shaun, but I wasn't sure if the Falcon used the same unit as the Titan ?

He may need to back off the front screw as well if it's set to single stage --- a simple adjustment could save admin getting involved.


image.jpg



All the best Mick

Yes the trigger on the titan and falcon is virtually the same.

[g60bv]

SilentSniper had gone to ground.
No contact or replies..
What a selfish tit.

Id be mortified if something I sold was faulty or worse. Dangerous!

[micky2]

Have you tried the addvice given above with the adjustments.

[gingernut]

With respect asking the OP to try and fix this gun is missing the point.

Also I recall that this isn't an FN12 but some sort of pistol /rifle combo.

The failure of the Seller to respond says it all.