Results 1 to 4 of 4

Thread: Artemis P10 shroud modification?

  1. #1
    Join Date
    Aug 2010
    Location
    St. Austell.
    Posts
    607

    Artemis P10 shroud modification?

    Heyy chaps, How can I modify a P10 to quieten it down, please. This needs to be a self mod job. Has anyone modified it by fitting baffles and/or perhaps drilling the muzzle end support thingy? I have the use of a small lathe, but can't do screw cutting. No 'commercial' shrouds, , funds are tight.
    I like Cornish Pasties.

  2. #2
    Join Date
    May 2008
    Location
    chesterfield
    Posts
    763

    p10 moderator

    hi , I've had nothing to do with the p10 but i'd imagine they are very similar to the p15 setup ?,I put a "new baffles/hair curler felt jobbie in the muzzle end and a curler / felt in the back draft area". moved the silencer 50mm forward for extra baffle space "also IMO safety wise" I don't think a flush silencer / air cylinder in a bullpup is all that safe

  3. #3
    Join Date
    Jun 2010
    Location
    Accrington
    Posts
    3,585
    Simply put some hair curler baffle in the cavity between the barrel and end then fit a silencer adapter and silencer, mines very quiet even with a very short mod.

  4. #4
    Join Date
    Jan 2013
    Location
    Barnsley
    Posts
    2,359
    I bought the threaded end cap off . Then added a tiny silencer. Works superbly

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •