really easy and cheap to sort out.
Most people who wear glasses struggle to get the reticle in focus on the connect without wearing glasses,
The diopter adjustment is only +/-2 on the connect. All you need to do is go to an optician and get a 35mm round lens in your prescription. (costs about £10). You then put that lens into the rubber twist out section on the diopter (you don't need to take anything off) i then use rubber 'o' rings 31mm x 3mm cross section to pad out the gap between your prescription lens and the inside of the rubber diopter 'cup'. Literally the whole job takes a minute and you get the benefit of the full +/- 2 diopter adjustment - making the reticle pin sharp. You then have a perfect scope fully retrofittable to standard - no glasses needed!
(the lens just squeezes in the end of the rubber lip and is held in by the 'o' rings - or 2 little bits of blue tack if you don't want to get the 'o' rings - few quid on the 'bay'
https://imgur.com/1cDELhi