BSA Mercury S

[jonnyone]

Just came from local dealer and one of the above just came in that was cocked but won't fire.
By sounds of things (a rattle inside stock) the trigger seems to have come apart and as such it won't fire.
It not my place to get involved but I was just wondering if any of the BSA fans know or can take a stab at what could be wrong here? I'm guessing that the Mercury has a central latch rod inside the piston and that to release the piston the trigger will need to be reassembled or the sear released out of the stock.
Any ideas anyone? Is this a common problem and easy to solve or is it a nasty owner to resolve?
Only asking if I can give the shop owner a head start on matters?
Cheers
Dave

[look no hands]

Take the action out of the stock and you can see the trigger mechanism pretty easily, it shouldn't be too hard to trip the top sear that holds the piston rod back, I've not really heard of the triggers falling apart but I know the pins that hold all the mechanism together can come out if the action isn't put back in the stock carefully but the stock normally holds them in once put back in, there is a small conical spring that goes behind the piston sear, that may need looking at.

Pete

[jonnyone]

Take the action out of the stock and you can see the trigger mechanism pretty easily, it shouldn't be too hard to trip the top sear that holds the piston rod back, I've not really heard of the triggers falling apart but I know the pins that hold all the mechanism together can come out if the action isn't put back in the stock carefully but the stock normally holds them in once put back in, there is a small conical spring that goes behind the piston sear, that may need looking at.

Pete

Thanks Pete. That advice may save the gun getting sent off for repair rather than done in-house.
I'll pass on the information fella.
Dave

[Blackrider]

Good luck with the Merc S !
One of the classic BSA air rifles I’ve never owned but really should.
One day maybe ?

[jonnyone]

Good luck with the Merc S !
One of the classic BSA air rifles I’ve never owned but really should.
One day maybe ?

I once stumbled upon a Mercury S action one day when out on calls in work. It's missing it's cocking lever, front stock bracket and worst of all it's stock. But I have to say that not being a BSA fan I had to admit the action was sturdy and bluing was lustrous. You could tell a high polish had been given to the metalwork before the bluing process. I was impressed.
Just gutted the other bits were missing. As this was one BSA (also my Scorpion pistol) I didn't mind owning!
Dave

[look no hands]

I once stumbled upon a Mercury S action one day when out on calls in work. It's missing it's cocking lever, front stock bracket and worst of all it's stock. But I have to say that not being a BSA fan I had to admit the action was sturdy and bluing was lustrous. You could tell a high polish had been given to the metalwork before the bluing process. I was impressed.
Just gutted the other bits were missing. As this was one BSA (also my Scorpion pistol) I didn't mind owning!
Dave

They do have a nice finish on the S's, the walnut stocks can be a bit bland sometimes (same goes for the Airsporter S's) but sometimes you get one with a half decent grain pattern, very occasionally a very nice one.

Pete