Reccomendations for a Knockdown Plinking Target

[A J Burgess]

As above looking for recommendations for a knock down plinking target for use with CO2, SSP and Spring powered Pistols, ideally I want one that you shoot to reset rather than pull on a string or walk back too.

I remember years ago there was a Walther one, with 4 targets, ducks I think and a centre target to reset.. not sure if these where anygood or up to the task long term, I know they where expensive.

TIA

[rockdrill]

Have a look at the offerings from this forum's sponsor:

https://www.jsramsbottom.com/targets...rgets-etc.html

Unfortunately a lot is out of stock, but there are some reasonable targets still available at decent prices.

I recently bought two of the Gun Tuff Gallery Resetting Targets and one of the Biathlon 5 Hole Targets.

Quality is pretty reasonable for the prices and quick delivery.

The Biathlon Target comes with hole size reducer rings fitted, but these are easily removed for use with a pistol.

[BC312]

I made my self a bell target, you either miss or hit. Was going to post my efforts on here but cant bring up pictures. I can put a smily face if that helps.

[Sanyati]

I just got a couple of Remington branded knock down targets with a string pull reset, very impressed wth the quality, about 20 quid each. Been teaching my daughter to shoot and the reactive knock downs are a hit.
Even the mild HW40 can knock them down. Nice solid steel plate that flattens pellets, reducing ricochet issues too. Definitely worth a look.

[Halimede]

I got a GunTuff from JSR, it is a string re-set thing though. An 11 ft/lb rifle knocks the targets down so fast that they tend to bounce back up. It is better as a pistol target but the smallest reducer is too small for me so I removed it. As mentioned previously it is easily done. Replacing the stickers on the target plates help a bit as after a few hits they get indistinct (to aged eyes).

[fatiboyjoe]

Been looking at the guntuff biathlon for a while now wondering if the reducers could be removed to make target holes all the same size. Great to now know they can be, so will order one with my next order of pellets.
Thanks for the info.
Joe